A general purpose non-shrink (Class A)
cementitious grout ideal for most void filling
Application thickness 20mm-120mm
Pre-hardening volume-adjusting. Controlled
gaseous expansion system compensates
for shrinkage and settlement before
Ready to use, pre mixed, requires only the
addition of water
Can be pumped, trowelled, rammed or
flowed to areas where normal grouting
methods do not suffice.
Can be mixed for stiff, plastic, flowable or
No metallic iron content to cause staining
Lower water/cement ratio reduces drying
shrinkage, increases durability and reduces
All general purpose grouting
Precast and pre stressed panels
Grouting in column bases
Filling core holes, rod holes and defects in
Filling for hollow block walls
Caulking of joints and pipes
SUBSTRATE AND SURFACE PREPARATION
The substrate surface must be clean, sound and free from oil, grease, curing compound or any loose materials.
It must be mechanically abraded back to a sound concrete surface.
Bolts or anchor holes must be clean and free from dust or loose material. This can be achieved by blowing
clean the hole.
Base plates must be cleared of all rust, oil or grease. It is essential to provide air pressure relief holes for